£4,719.50

WARHORSE

larger image

FEATURES

Sub sonic filter
Low pass crossover
Bass boost
Gain control
Remote bass control
Adjustable limiter
LED status/protection indicator
Stereo RCA inputs with paralleled outputs
In/out PS2 multi pin din connector for WXRC and linking amps together
Anderson 8 gauge 50 amp power pole speaker connections
1/0 gauge +12V power and ground terminals
3 each
Custom made planar transformers
Push/pull fan configuration
TRULY 90% efficient
In case you missed that…90% efficient!!!

SPECIFICATIONS RMS Power in Watts @14.4V, 2O Mono, =1.5% THD+N @14.4V, 4O Mono, =1.5% THD+N	10000 x 1 5000 x 1
Length	35” (888mm)
Height	3 3/4” (96mm)
Width	17 3/4” (450mm)
Weight	66.8 lb (30.3kg)
Frequency Response, + 0 / - 1 dB	20 Hz - 200 Hz
Signal-to-Noise Ratio	>95 dB, a-weighted, re: rated power
Input Sensitivity	170 mV - 5 V low level
Low Pass Crossover	Variable Low-Pass, 50 - 200Hz, 24dB per octave
High Pass Sub-Sonic Crossover	Variable High Pass, 20 - 60Hz, 24dB per octave
Bass Boost	Variable 0 to +18 dB boost @ 40 Hz

The WX amplifier outputs dangerous voltage levels from the voice coil (speaker) outputs.

Never contact the voice coil outputs, connect speakers, or speaker wires if the amplifier is turned on. Turning the amplifier on without loading both voice coil outputs or connecting the speaker(s) will increase the risk of electrical shock and could damage the amplifier.

Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.

Add to Cart: