£151.99

Reactor 4 Channel Amplifier

larger image

DESCRIPTION

More power, more quality and more bass – Reactor is the angry upgrade to FUSION’s Encounter car audio range and is dripping with technology.

Reactor Amplifiers feature angled connections and terminals providing multiple installation options and allowing a cleaner installation finish. Mounting feet are incorporated into the end caps, creating clean lines and aesthetics. Three-way protection is also incorporated - providing safety from thermal, short circuit or output short - preventing your amplifier from overheating, incorrect connection or reverse polarity.

Variable LPF (40Hz - 160Hz)
Variable HPF (40Hz - 600Hz)
Crossover selector switch for easy selection of filter
Output RCA terminals for daisy chaining audio signal in multiple amplifier installations
Plastic endcaps incorporating mounting feet for cleaner installation
45deg angled power terminals - accepts FUSION 4 gauge amplifier kit cable. Easy to install - not crimped terminals on cable
45deg terminals for speaker connection - accepts 8 gauge cable. Easy to install - no crimp terminals on cable required
3-Way protection – thermal, short circuit, output short

What type of amplifier do you need?
Monoblock – Used to power subwoofer(s)
2 Channel – can power one subwoofer or up to two pairs of speakers
4 Channel – ideally suited to power a full compliment of speakers in your vehicle (up to four pairs)

SPECIFICATIONS

Bass Boost @ 45Hz	-
Channel Seperation	>50dB
Frequency Response (-3dB)	10Hz - 40kHz
Fuse Rating	40A x 2
Input Impedance	20K
Input Sensitvity	0.2V - 8V
Max Power Rating (Watts)	900
Ratings per Channel	90 Watts RMS per Channel @ 4 Ohms: 125 Watts RMS per Channel @ 2 Ohms: 230 Watts RMS Bridged @ 4 Ohms
Signal to Noise	>87dB
THD @ Rated Power	1% (1kHz)
Variable High Pass Filter	6dB / Octave
Variable Low Pass Filter	6dB / Octave